MARMITEK IR CONTROL 10 XTRA

MARMITEK IR CONTROL 10 XTRA

SKU: 8718164531408
₨5,275.00Price

MARMITEK IR CONTROL 10 XTRA... 1 year warranty

 

Strong points : 

 

  • Fits all infrared remote controls
  • 2 cables with LED Blaster
  • Quick setup
  • IR receiver range: 10 m

 

Marmitek IR Control 10 Xtra

 

The Marmitek IR Control 10 Xtra infrared signal transmitter is used to extend the IR (infrared) signals of remote controls, for example to control A / V devices placed in a closed cabinet. This transmitter is distinguished from the Marmitek IR Control 10 transmitter by the addition of two extension cables with blaster LED.

 

The Marmitek IR Control 10 Xtra includes: an IR receiver, an IR module and an IR extension cable with two LED IR emitters and two cables with a blaster LED.

 

The IR receiver receives the infrared commands from the remote control (s) and transmits them to the IR module. The IR module receives infrared commands from the IR receiver, processes them and transmits them to all connected IR extension cables. The IR extension cable receives infrared commands from the IR module and converts them into infrared signals with its LEDs so that the devices can be controlled. Since the IR LEDs have a limited range, they must be placed precisely on the IR window of the device to be controlled. The two cables equipped with a blaster LED offer them a field of action more load and thus allow the control of several devices.

 

The Marmitek IR Control 10 Xtra infrared transmitter allows you to place the various audio-video devices in a closed cabinet and continue to control them with their original remote control. Only the IR receiver should be installed in view of the original remote control (s). A simple, practical and efficient solution for a discreet home cinema installation!

  • Specifications

    IR receiver

    • Frequency range: 30 - 60 kHz
    • IR reception range: ± 10 meters
    • IR reception angle: 90º (+ 45º / -45º from center)
    • Cable length: 3 meters, can be extended up to 300 meters
    • IR reception indicator: purple LED indicator
    • Status indicator: green LED indicator
    • Receiver unit dimensions: 40 x 13 x 11 mm

    IR module

    Power supply: 100-240 VAC 50/60 Hz, 12 VC 200 mA (supplied)

    Power supply status: 5-24 VDC / 5-12 VAC plug, - 5.5 mm outside / + 2.1 mm inside (not supplied)

    IR input:

    - 1x 3.5 mm jack socket, for standard IR receiver

    - 1x screw connector, for a maximum of 6 IR receivers connected in parallel.

    Can be extended up to 300 meters through CAT5 (or equivalent)

    IR output:

    - 4x 3.5 mm jack plug (mono), switchable for IR extension cables with emitter and blaster LEDs

    Dimensions: 95 x 46 x 20 mm

     

    IR extension cable with 1 blaster LED

    Connection: 3.5mm jack plug (mono)

    IR LEDs: 1x IR blaster LED

    Cable length: 3 meters

     

    IR extension cable with 2 emitting LEDs

    Connection: 3.5mm jack plug (mono)

    IR LEDs: 2x IR emitter LEDs

    Cable length: 3 meters

     

    Package contents

    1x IR module

    1x IR receiver

    2x Extension cable with 1 IR blaster LED

    1x IR extension cable with two IR emitter LEDs

    1x AVR cable

    1x AC adapter

    1x User manual